Skip to product information
1 of 5

SikaTile 300 Standard Tile Adhesive

SikaTile 300 Standard Tile Adhesive

Regular price ₱277.00
Regular price Sale price ₱277.00

SikaTile 300 | Standard Cement-Based Tile Adhesive

 

A standard cement-based tile adhesive for interior and exterior wall and floor tile installations. Suitable for ceramic and homogeneous tiles on concrete and mortar substrates.

 

Product Details:

Packaging: 25 kg/bag

 

Uses and Area of Application

- Interior and exterior wall and floor tiling

- Ceramic and homogeneous tile installation

- Concrete and mortar substrates

 

AVAILABLE for PICK-UP in TAYUG, PANGASINAN — Ready Stock at LPM Construction Supply Pangasinan Hub.

View full details

Instructions

Coverage guide:
- Using a 4mm x 4mm notched trowel approx. 2.5kg/m2
- Using a 6mm x 6mm notched trowel approx. 3.5kg/m2
- Using a 10mm x 10mm notched trowel approx. 5.0kg/m2


MIXING :
Add one 25 kg bag of DAVCO Standard Tile Adhesive to approximately 5 to 6 liters of clean water, mixing continuously until a lump-free, creamy consistency is achieved.

APPLICATION:
Allow the mix to stand for 3-5 minutes; remix then use the adhesive. Spread the adhesive onto the substrate using either a 6mm x 6mm notched trowel for wall tiling, or a 10mm x 10mm notched trowel for floor tiling. The choice of trowel should be determined by the size of the tiles, depth of knobs, grooves or ridges on the back of the tile, and the evenness of the substrate.
• A 6mm x 6mm notched trowel is recommended for the mosaic tiles.
• Thicker bed adhesive allow for better contact to the substrate as well as picking up unevenness especially in the case of slates.
• For tiles with deep grooves or ridges, such as slate or lugged backed tiles, the adhesive should be butter coated onto the back of the tiles in addition to being notched-trowelled onto the substrate.
• Do not spread more than 1 m2 of adhesive at a time. Ensure that the adhesive is wet when the tiles are laid and tapped into position to ensure positive contact with the adhesive.
• Ensure that there are no voids under the tiles.
• Do not allow the adhesive to skin over prior to tiling.
• Allow the mix to stand for 5-10 minutes; remix then use the adhesive.
• Install tiles within the duration of the open time.
• Do not disturb or walk-on tiles until they are laid for 24 hours.

Packaging Dimensions

45cm x 30cm x 10cm

Payment & Shipping

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation


(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH