1 6

Davco Dustless PREMIUM Tile Adhesive 西卡

Davco Dustless PREMIUM Tile Adhesive 西卡

₱695.00
₱695.00

Davco Dustless Premium Tile Adhesive, a premium grade, thick or thin bed, fast-setting, grey cement-based tile adhesive specifically formulated to provide higher coverage, easier application, longer open time and extra high bond strength. It has superior water resistance and low shrinkage capability.

 

Uses

Suitable for porous and non-porous tiles i.e glass mosaics, glazed glass ceramics, granite, slate and natural stones.

• Walls/floors, interior/exterior application
• Concrete, cement renders / screeds, block work, rendered brickwork and mortar leveling
• Smooth and even lightweight concrete block or thick bed application to level uneven parts
• Waterproofing membranes and immersed areas especially swimming pools

 

Packaging

25kg Bag

 

Coverage
• Using a 6mm x 6mm notched trowel approximately 6 - 7 sqm per 25kg bag
• Using a 10mm x 10mm notched trowel approximately 5 - 6 sqm per 25kg bag

 

 

For orders beyond available quantity or unavailable products, click here for bulk preorders, or contact our hotline for assistance.

OTHERS BOUGHT THIS WITH
Davco Standard Tile Grout 西卡

₱65.00

Davco K11 Flex - Cementitious Waterproofing 西卡

₱935.00

Davco K11 SuperFlex - Flexible Cementitious Waterproofing 西卡

₱5,250.00

View full details

Instructions

Mixing and Application

Add one 25kg bag of DAVCO DUSTLESS PREMIUM TILE ADHESIVE to approximately 5 to 6 liters of clean water, mixing continuously until a lump-free, creamy consistency is achieved.

Allow the mix to stand for 5 - 10 minutes; remix then use the adhesive. Spread the adhesive onto the substrate using either a 6mm x 6mm notched trowel for wall tilling, or 10mm x 10mm notched trowel for floor tiling. The choice of trowel should be determined by the size of the tiles, depth of knobs, grooves or ridges on the back of the tile and evenness of the substrate.
• A 6mm x 6mm notched trowel is recommended for mosaic tiles.
• Thicker bed of adhesive allow for better contact to the substrate as well as picking up unevenness especially in the case of slates.
• For tiles with deep grooves or ridges, such as slate or lugged backed tiles, the adhesive should be butter coated onto the back of the tiles in addition to being notched-trowelled onto the substrate.
• Do not spread more than 1 square meter of adhesive at a time. Ensure that the adhesive is wet when the tiles are laid and tapped into position to ensure positive contact with the adhesive.
• Ensure that there are no voids under the tiles.
• Install tiles within the duration of the open time.
• Do not disturb or walk on tiles until they are laid for 24 hours

Packaging Dimensions

45cm x 30cm x 10cm

Payment & Shipping

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation


(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH