1 1

Apo Power SLC Regular

Apo Power SLC Regular

₱980.00
₱980.00

Regular Self-Levelling Compound

 

Apo Power SLC (Self Levelling Compound) - Regular is an excellent self-smoothing cementitious leveling compound formulated with imported polymers and special additives. It is an ideal self-leveling material with high fluidity and plasticity to prepare concrete subfloors prior to laying of resilient floor coverings. It is a nontoxic, safe-to-use and environment friendly product.

 

Packaging: 25kg bag

Coverage: approximately 5sqm/25kg (based on 3mm thickness)

 

Uses / Area of Application

- Provide a smooth, level and strong substrate for various floors, carpets, ceramics and resilient floor coverings

- For use in residential and commercial buildings

 

 

For further inquiries, bulk orders of this, and other related products - you may get also get in touch with our team, through our contact details here.

OTHERS BOUGHT THIS WITH
Apo Power SLC Primer - Primer for Self Levelling Compound

₱800.00

Apo Powerbond

₱220.00

View full details

Instructions

Application Instruction
The subfloor must be clean, dry, strong and free from loose materials and foreign materials which may inhibit bond. The subfloor should be cleaned and ground thoroughly if necessary.

To ensure good adhesion and reduce air release from the subfloor, the subfloor must be primed with one or two coats of APO Power Primer Please refer to the separate technical data sheet of APO Power Primer).

APO Self Leveling Compound should be mixed using a suitable mixer. Use one bag of APO Self Leveling Compound with 6 to 6.5 liters of clean water. Slowly add ½ the bag of powder to the water while mixing vigorously and thoroughly and then add the remainder of the bag to the mix. Mix thoroughly for 3 to 5 minutes to obtain a viscous, lump-free mixture. (Note: Do not add more water than prescribed as this will promote bleed and separation with a reduction in bond and strength).

Pour the mixture on the area to be applied, spread the material uniformly to required thickness using suitable toothed rake (range of thickness is 1 - 4mm). Remove trapped air bubbles using a spike roller.

Various flooring materials can be applied on it after it has become dry usually after 48 hours in dry weather.

Packaging Dimensions

25kg bag

Payment & Shipping

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation


(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH