Sikaflex-140 ® Construction is supplied ready to use.

After suitable joint and substrate preparation - pre-treatment/priming, insert backing rod to required depth and apply primer if necessary.

Insert foil pack into sealant gun and firmly extrude Sikaflex® Construction into joint making sure that it is full contact with the side of the joint. Fill the joint, avoiding air entrapment. Sikaflex® Construction must be tooled firmly against joint sides to ensure good adhesion.

Masking tape must be used where sharp exact joint lines or exceptionally neat lines are required. Remove the tape whilst the sealant is still soft. Sleek joint with smoothing liquid for a perfect sealant surface.

Priming / pre-treatment

The substrate must be sound, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants, poorly bonded paint coatings or friable particles which could affect adhesion of the sealant.

▪ The substrate must be of sufficient strength to resist the stresses induced by the sealant during movement.
▪Use wire brushing, abrading, grinding or grit blasting equipment to prepare the surface.
▪ Repair all damaged joint edges with suitable Sika repair products
▪ New or refurbished joints must be saw-cut. Where joints in substrate are saw cut. After sawing, all slurry material, must be flushed away and joint surfaces allowed to dry.
▪ All dust, loose and friable material must be completely removed from all surfaces before application of any activators, primers or sealant.
▪ For optimum adhesion, joint durability and critical, high performance applications such as joints on multistorey buildings, highly stressed joints, extreme weather exposure or water immersion / exposure. The following priming and/or pre-treatment procedures must be carried out:

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation

(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH